RMZ Commercial Door Operator
Z SERIES
The new Z Series RMZ Hoist is designed for high- or full-lift sectional and rolling doors requiring a limited duty cycle. Its advanced features and robust mechanical design combine to provide a medium-sized operator that is the new standard in the industry.
Max Door Height: 16′
Max Door Weight: 620 lbs Sectional / 580 lbs Rolling Steel
Max Speed: 11.5 in/sec
Motor Type: 1/2 HP, 120 VAC capacitor start/run motor. The motor is replaceable without changing limits. It is thermally protected.
Drive
- Primary — SuperBelt® auto tensioning poly-V J belt.
- Secondary — chain and sprocket reduction.
RMZ Commercial Door Operator Z Series
Features
LimitLock® electro-mechanical limits.
The max run timer automatically adjusts the up and down run time.
SuperBelt® self-tensioning primary drive reduction
Delay on reverse.
16-character LCD display.
UL 325 Listed.
3-button control station.
2-year/20,000-cycle warranty.
Programmable mid-stop.
Right or left-hand emergency hoist models are available for manual operation.
Built-in cycle count and troubleshooting assistance via LCD display.
Product Specifications
Brake: 24 VDC disc brake.
Friction Clutch: Adjustable clutch to help protect against door and operator damage.
Emergency Hoist: Manual Operation Pull cord release with a manual chain hoist.
Pre-wired to Accept
- Monitored entrapment devices
- Single or 3-button control stations.
- External interlock switches.
Product Literature
instructional Manuals
Accessories & Options
Timer Close Module: Timer close set via the LCD display from 2 seconds up to 5 minutes. Includes pre-close warning contacts, timer hold input, auxiliary open input, normally closed safety input, and T3 monitored edge input. (P/N: OPABTCX.S)
Auxiliary Output Module: Provides relay contacts at the open, close, and mid-stop limits. Contacts for 5-minute lamp, and “ADA” contacts set via LCD display to warn during opening, closing or both. (P/N: OPABIOX.S)
Edge Sensing Module: Input allows connection of a T3 monitored safety edge. When advanced timer close features are required, use the Timer Close Module. (P/N: OPABESX.S)
Friction ClutchUL 325 Approved Reversing Devices:
Installing a monitored external entrapment device is required for the close operation of all commercial door operators during momentary contact.
Only the following devices, when purchased through Overhead Door Corporation, are UL-approved for use to meet this requirement:
- Safe-T-Beam® Photocell kit with adjustable bracket P/N: 38176R.S 1
- Impact-protected Commercial Photocell Kit P/N: OPAKPE2.S
- NEMA 4X Photocells P/N: OPAKRPEN4GX.S
- Retro Reflective NEMA 4X Photocells P/N:OPRAKRPEN4X.S
- Monitored Light Curtains – 3’ P/N: OPAKMLC3.S 6’ P/N: OPAKMLC6.S
- Light curtain mounting brackets (6 total) P/N: 112809.0001.S
- MillerEdge ME/MT/CPT (DC or T3) 2-wire edge sensor. Must be used with TCM (OPABTCX.S), ESM (OPABESX.S), or Interface Module (OPAKMEIX.S).
You are in the right place for the best service, installation, or repair of commercial door operators. Overhead Door Company of Southern California™ has been delivering superior operators and accessories for over 25 years in San Diego, CA.
Overhead Door™ Commercial Door Accessories
The Overhead Door™ brand offers various commercial operator accessories to meet your needs. Complete your commercial door system with accessories that help enhance your facility’s operation and provide additional safety and convenience.
Call us Today at (308) 455-4036
Overhead Door Company of Kearney™ – 2110 E. Hwy 30, Suite 3, Kearney, NE 68847
Call us Today (308) 455-4036
Or Email Us on the Form Below.
*Please Fill Out The Required Fields
Call us Today at
(308) 234-3667
Or Send us an Email.
Overhead Door Company of Kearney™ –
2110 E Lincoln Hwy Suite 3, Kearney, NE 68847