Thermacore® Sectional Steel Doors
Superior Performance & Engineered To Last
Thermacore® Sectional Steel Doors deliver energy efficiency, durability, and reliable performance for commercial and industrial facilities. Featuring insulated steel panels and engineered sealing systems, these doors help reduce heat transfer, support indoor temperature control, and withstand the demands of daily commercial operation.

Engineered for High Thermal Efficiency.
The Thermacore® product line’s unique manufacturing process delivers a CFC-free, fully encapsulated, foamed-in-place panel that maintains R-value performance year after year. Thermal breaks between the internal and external skins, a PVC thermal break, and a joint seal minimize air infiltration and deliver some of the highest thermal efficiency ratings in the industry for specified applications.
Ideal Applications Include
Warehouse Solutions
Manufacturing
Food & Beverage
Automotive
Government Facilities
Thermacore® Sectional Steel Doors Overview
Constructed For Superior Performance
- Continuous foamed-in-place polyurethane insulation and roll-formed, hot-dipped galvanized steel construction provide superior thermal efficiency, exceptional strength-to-weight ratio, and proven durability
- Dual thermal break and joint seal between internal and external skins minimize air infiltration and provide the highest door system thermal
- efficiency in the industry
- Specially designed track and heavy-duty fixtures ensure a tight and reliable fit.
- Two coats of baked-on polyester paint provide a durable finish
- Unique design allows on-site door customization for quick and precise installation, replacement, or repairs
High-Usage Components For Special Applications Promote Long Life & Low Maintenance.
- Heavy-duty, precision-ground headplate bearings for enhanced counterbalance performance
- Oil-tempered, heavy-duty helical wound torsion springs, available in up to 100,000 cycles for extra-long life
- Solid steel counterbalance shaft reduces fatigue and deflection
- Double end stiles and end hinges lessen loads on door section
- Heavy-duty 3″ (76 mm) hot-dipped galvanized steel track and 10 ball-bearing, long-stem rollers
- Additional center hinges reduce overall door section hinge loads
- Bottom sensing edge stops/reverses door upon contact with an obstruction
Built to last
- 10-year* limited warranty against panel delamination of foam and steel skins
- 1-year limited warranty on door
- 3-year/20,000 cycle limited warranty on the door and operator system

Thermacore® Wind Load Insulated Sectional Steel Doors
The Thermacore® sectional door models 515 and 525 are engineered to withstand higher design pressure than our other Thermacore® models.
Overhead Door™ Thermacore® Collection
Improve your facility’s energy efficiency, security, and everyday functionality with Thermacore® Sectional Steel Doors from Overhead Door Company of Grand Island™. We can tailor our commercial door solutions to your building dimensions, insulation needs, operating frequency, and design requirements.
Why Choose Thermacore® Sectional Doors?
- Energy efficiency: Insulated steel panels help reduce heat transfer.
- Durability: Galvanized steel construction is designed for long-term commercial use.
- Weather resistance: Thermal breaks and joint seals help reduce air infiltration.
- Custom options: Available glazing, finishes, wind-load designs, pass doors, and high-cycle hardware vary by model.
- Commercial versatility: Suitable for warehouses, manufacturing facilities, distribution centers, automotive shops, and climate-controlled buildings.
Explore Thermacore® Sectional Doors from Overhead Door Company of Grand Island™ to find an insulated commercial door that fits your building’s opening, thermal requirements, and daily operating needs.
Overhead Door™ Brand participates in the DASMA Thermal Performance Verification Program. The program verifies the thermal performance of sectional doors. The lower the U-factor rating, the better the thermal performance.
The symbol indicates a verified U-factor rating in accordance with the DASMA Thermal Performance Verification Program.
1 – U-Factors are based on independent testing and verified per ANSI/DASMA 105. For products other than aluminum full-view doors, testing was conducted on specific sizes of solid doors. Actual thermal performance may vary by door size and configuration.
2 – R-value is a measure of thermal efficiency. The higher the R-value the greater the insulating properties of the door. Overhead Door Corporation uses a calculated door section R-value for our insulated doors.
Thermacore® Sectional Steel Doors 596
For Extra-Heavy-Duty Applications Where Thermal Efficiency & Sound Suppression Are Desirable
The Thermacore® sectional door model 596 features one of the best overall air-infiltration ratings in the industry, along with a Class 26 sound-transmission rating. Ideal for heavy-duty applications where thermal efficiency and sound suppression are both important.
Features ozone-friendly polyurethane insulation.
U-factor1: 0.17
R Value2: 17.40 (3.06)
Max width: 36’2″
Max height: 24’1″
Section Thickness: 2″
Material: Steel
Material Gauge: 20-gauge galvanized
Air Infiltration: at 15 mph (24 kmph) .08 cfm/ft2 (1.46 m3/hr/m2)
Advanced Performance Sectional Steel Doors Model 850
For Applications Where Climate Control, Durability & Ease of Maintenance Are Primary Concerns
Thermacore® AP Door Model 850 is engineered to deliver advanced performance in commercial and industrial applications where climate control, durability and ease of maintenance are primary concerns.
U-factor1: 0.14
R Value2: 26 (4.58)
Section Thickness: 3″ (76.2 mm)
Material: Steel
Material Gauge: .015″ (.38 mm)
Max Width: 40’2″ (12,243 mm)
Max Height: 24’1″ (7317 mm)
Air Infiltration: At 15 mph (24 kmph) .09 cfm/ft² (1.65 m³/hr/m²)
Thermacore® Sectional Steel Doors 591
The Thermacore® sectional door model 591 meets or exceeds almost any thermal-efficiency requirement.
This heavy-duty door fits a wide range of opening sizes and applications, making it the best-selling door system in the Thermacore® line and one of the most specified insulated sectional doors in the industry. Features ozone-friendly polyurethane insulation.
U-factor1: 0.19
R Value2:14.86 (2.63)
Section Thickness: 1 5/8″ (41 mm)
Material: Steel
Material Gauge: .015″ (.38 mm) galv.
Max Width: 35’2″ (10,719 mm)
Max Height: 24’1″ (7,341 mm)
Wind Load: Designs available for usage in high-wind conditions
Thermacore® Sectional Steel Doors 592/599
With a U-factor of .10 (R-value of 17.5) and one of the industry’s best overall air infiltration ratings, the Thermacore® Model 592 is one of the most thermally efficient door systems in its class.
Thermacore® Sectional Steel Doors 592
With one of the best overall air infiltration ratings in the industry, the Thermacore® Sectional Steel Door Model 592 is the most thermally efficient door system in its class.
The steel-polyurethane-steel panel construction provides a thermal barrier that withstands extremely hot or cold climates and the most demanding environmental requirements. Features ozone-friendly polyurethane insulation.
U-factor1: 0.17
R Value2: 17.40 (3.06)
Section Thickness: 2″ (51 mm)
Material: Steel
Material Gauge: .015″ (.38 mm) galv.
Max Width: 40’2″ (12,243 mm)
Max Height: 32’1″ (9,779 mm)
Air Infiltration: at 15 mph (24 kmph) .08 cfm/ft2 (1.46 m3/hr/m2)
Thermacore® Sectional Steel Doors 599
With one of the industry’s best overall air infiltration ratings and a flush-panel design, the Thermacore® sectional door model 599 is the most thermally efficient door system in its class.
The steel-polyurethane-steel panel construction provides a thermal barrier that withstands extremely hot or cold climates and the most demanding environmental requirements. Features ozone-friendly polyurethane insulation.
U-factor1: 0.17
R Value2:17.40 (3.06)
Section Thickness: 2″ (51 mm)
Material: Steel
Max Width: 40’2″ (12,243 mm)
Max Height: 32’1″ (9,779 mm)
Wind Load: Designs available for usage in high-wind conditions
Thermacore® Sectional Door Model 593/594
Offers excellent thermal efficiency to fit a broad range of medium-duty applications
Thermacore® Sectional Steel Doors 593
The Thermacore® sectional door model 593 features a ribbed, textured surface and meets the strictest product tolerances and quality standards for long-lasting performance and a great look.
U-factor1: 0.22
R Value2: 12.76 (2.26)
Section Thickness: 1 3/8″ (35 mm)
Material: Steel
Material Gauge: .015″ (.38 mm) galv.
Max Width: 20’2″ (6147 mm)
Max Height: 16’1″ (4902 mm)
Air Infiltration: at 15 mph (24 kmph) .08 cfm/ft2 (1.46 m3/hr/m2)
Thermacore® Sectional Steel Doors 594
The Thermacore® sectional door model 594 features a raised-panel, wood-grain-textured exterior surface and meets the strictest product tolerances and quality standards for long-lasting performance and good looks.
U-factor1: 0.22
R Value2:12.76 (2.26)
Section Thickness: 1 3/8″ (35 mm)
Material: Steel
Material Gauge: .012″ (.3 mm) galv.
Max Width: 20’2″ (6147 mm)
Max Height: 16’1″ (4902 mm)
Air Infiltration: at 15 mph (24 kmph) .08 cfm/ft2 (1.46 m3/hr/m2)
Thermacore® Insulated Sectional Steel Doors Model 598
A well-built door that provides a higher level of thermal protection than standard insulated doors
The Thermacore® sectional door model 598 is exceptionally well-built and provides higher thermal protection than standard insulated doors.
U-factor1: 0.27
R Value2: 9.31 (1.64)
Section Thickness: 1″ (25.4 mm)
Material: Steel
Material Gauge: .012″ (.3 mm) galv.
Max Width: 16’2″ (4,928 mm)
Max Height: 14’1″ (4,293 mm)
View Our Products
Call us Today (308) 234-3667
Or Send Us An Email
*Please Fill Out The Required Fields











